HOW TO USE
Central control address of the indoor unit set-up
First, you need to assign address that does not overlap with other equipment (Air-condi-
tioner/Ventilation/Heating equipment) considering the entire installation composition con-
nected to one AC Ez Touch.
The equipment address can be set in hexadecimal from 00 to FF.
Outdoor unit and indoor unit number assignment
If the outdoor unit product is Multi V, it is recommended
to set the first digit of the address as the outdoor unit
number, and set the second digit as the indoor unit
number, so that the system composition and division
can be easily identified during the address setting.
Indoor unit central control address setting
The central control address setting method may be different according to the indoor unit product
or remote controller type, so set the address by referring to the indoor unit product or wired re-
mote controller manual.