Window Mounting The 2.3/2.5 Ghz Detached Antenna, With Rotation Capability - Alvarion BreezeMAX PRO-S CPE Product Manual

2.5.2 Window Mounting the 2.3/2.5 GHz Detached
Antenna, with Rotation Capability
The installation kit includes the following: 2 screws, 2 M4 washers, 2 rotation
bars and 2 suction cups (4).
Attach the rotation bars to the antenna and the suction cups to the rotation
1
bars. Refer to
Determine the location of the antenna on the glass. Attach it to the window by
2
pressing the suction cups onto the glass.
Connect the antenna cable to the connector located on the bottom side of the
3
antenna. Use only the torque key supplied with the antenna. Do not over
tighten. Do not use a wrench or a similar tightening tool.
Rotate the antenna left or right so the domed surface of the antenna is facing
4
the direction of the Base Station. Check the received Signal LEDs to ensure
the antenna is aimed correctly.
BreezeMAX CPEs Product Manual
Figure 2-19 for directions.
Installing the 2.3/2.5 GHz Detached Antenna
53