Table of Contents
Advertisement
2.3
Installing the Si CPE
The following sections describe how to install the Si CPE.
2.3.1
Installation Requirements
2.3.1.1
Packing List
Si CPE
Power Adapter and Mains Power Cord
2 meters Ethernet Cable
Wall Mounting Bracket kit for the Si CPE.
Smart Card (optional)
A CD with WiMAX Modem Application (optional)
2.3.1.2
Additional/Optional Items
Wall/window mountable detached antenna kit, including wall/window
mounting accessories and a 2 meters SMA-SMA (M/F) RF cable*.
Wall mounting kit with pan/tilt capabilities for the detached antenna*.
Mains plug adapter or termination plug (if the power plug on the supplied AC
power cord does not fit local power outlets).
Portable PC with an Ethernet card and a straight Ethernet cable for
configuring parameters using either Telnet or web browser. TFTP server SW is
required for downloading SW versions.
Other installation tools and materials (means for securing cables to walls,
etc.).
NOTE
Items marked with an asterisk (*) are available from Alvarion.
BreezeMAX CPEs Product Manual
Installing the Si CPE
35
Advertisement
Table of Contents
Troubleshooting
