Problem and Indication
Authentication Failure:
STATUS LED is blinking
green, SIGNAL LED 7 is
on, all other SIGNAL LEDs
are off.
Duplicate Name: STATUS
LED is blinking green,
SIGNAL LEDs 6 and 7 are
on, all other SIGNAL LEDs
are off.
Authentication Timeout:
STATUS LED is blinking
green, SIGNAL LEDs 5, 6
and 7 are on, all other
SIGNAL LEDs are off.
BreezeMAX CPEs Product Manual
Possible Cause
Authentication problem:
a. Wrong User Name
and/or User Password.
b.Maximum number of
Multiple Sessions (number
of SUs that can receive the
Service simultaneously)
has been reached.
User Name already exists
in the Base Station's
database, associated with
another SU (MAC address)
The unit was not
reauthenticated after
authentication timeout.
Corrective Action
Enter User Name and User Password and reset the
unit. If the problem persists, contact the operator.
Enter a correct User Name or contact the operator
for a new User Name/Password. Reset the unit after
configuring new authentication parameters.
Contact the operator.
Si CPE Troubleshooting
127