Installation Guidelines; Installing The Si Cpe - Alvarion BreezeMAX PRO-S CPE Product Manual

Chapter 2 - Installation
2.3.4

Installation Guidelines

The unit can be placed on a desktop or a shelf. It can also be wall mounted using
the optional bracket available from Alvarion. It can be configured to use either one
of its six internal antennas or a detached antenna (optional). Instructions for the
available installation options of the detached antenna are provided in the antenna
package and in
It is recommended to position the unit near a window facing the direction of
the Base Station, with the selected antenna aimed at the direction of the Base
Station. Do not cover the unit. Leave a free space of at least 50 cm around the
unit. Do not place any object between the selected antenna and the window
towards which the antenna is directed.
When a detached antenna is used, install it on a window or on a wall
according to specific conditions of the location. The antenna should be facing
the required direction. Use only the RF cable supplied with the antenna (if
needed, use a longer Ethernet cable).
Avoid metal obstacles such as metal window frames or metal film anti-glare
windows in the transmission path.
Position the unit (or the detached antenna) away from electrical equipment,
including the data equipment, monitor etc., metal furniture, and moving metal
objects such as metal fans or doors.
2.3.5

Installing the Si CPE

2.3.5.1 Connecting the Si CPE
To install the Si CPE:
If a Smart Card for the unit is available, insert it in the intended slot at the
1
bottom side of the unit.
If a CD with WiMAX Modem Application is supplied with the unit, refer to the
2
documentation of the WiMAX Modem Application.
Connect the Power Adapter DC cable to the POWER jack. Connect the AC
1
power cord to the Power Adapter. Connect the other end of the power cord to
the AC mains.
40
Section 2.4.
BreezeMAX CPEs Product Manual