Configuration Control - Alvarion BreezeMAX PRO-S CPE Product Manual

To perform SW download:
The required SW file should be available in the TFTP Server directory in a PC
1
connected to the unit.
Typically it is recommended to configure the IP address of the PC to
2
192.168.154.250, which is the default TFTP Server IP address of the unit. If a
different IP address is configured in the PC with the TFTP, configure the TFTP
Server IP Address to the same address.
Enter the name of the SW file (as called in the TFTP server) as the SW File
3
Name.
Select Perform SW Download and confirm the download request. Wait to
4
receive a success/failure message.
Following a successful download, the loaded SW version becomes the Shadow
5
version in the unit.
4.4.5

Configuration Control

The Configuration Control Submenu includes the following options:
Set Factory Defaults
Configuration File Download Control
Configuration File Upload Control
4.4.5.1 Set Factory Defaults
Select this option to reset the unit and revert to the default configuration. To avoid
unintentional actions you will be prompted to confirm the request. All parameters
except the Password will revert to the factory default values.
4.4.5.2 Configuration File Download Control
The Configuration File Download Control submenu enables to define parameters
related to downloading a configuration file from a TFTP server to the SU, and to
initiate the download operation. It includes the following options:
Show
TFTP Server IP Address
BreezeMAX CPEs Product Manual
Unit Control Menu
83