Installing The Odu Of The Pro-S Cpe; Odu Installation Requirements - Alvarion BreezeMAX PRO-S CPE Product Manual

Table of Contents

Chapter 2 - Installation

2.1

Installing the ODU of the PRO-S CPE

The following sections describe how to install the outdoor unit (ODU) of the PRO-S

CPE.

2.1.1

2.1.1.1

Packing List

ODU

Pole mounting kit

2.1.1.2

Additional Installation Requirements

The following items are also required to install the ODU:

Indoor-to-outdoor Category 5E Ethernet cable with two shielded RJ-45

connectors* (see

length), and an RJ-45 connectors crimping tool.

For units that connect to an external antenna (SE model): Antenna* and RF

cable* for connecting the antenna to the ODU.

SAU* (SU Alignment Unit) for antenna alignment and status verification.

Grounding cable with an appropriate termination.

Installation tools and materials, including appropriate means (e.g. a 1" to 4"

pole) for installing the ODU (and antenna where applicable).

2.1.1.3

Optional Items

Tilt Pole Mounting kit*.

To connect directly to the ODU for configuration/performance monitoring: A

special Y-cable*, a Notebook or Pocket PC/PDA with web browser, and a

straight Ethernet cable to connect the Notebook/PDA to the PDA connector

(RJ-45 plug) of the Y-cable.

Section 2.1.3

for details on approved cables and maximum

BreezeMAX CPEs Product Manual

Table of Contents

Breezemax si cpe