3Installation Procedure For The Copy Tray-L1 - Canon iR6570 Series Installation Procedure

When turning off the main power, be sure to go through the following in strict sequence to protect the machine's hard
disk:
1. Hold down on the power switch on the control panel for 3 sec or more.
2. Operate on the touch panel according to the shut-down sequence indicated so that the main power switch may be
turned off.
3. Turn off the main power switch.
4. Disconnect the power cable (for the power outlet).
1.5.3 Installation Procedure for the Copy Tray-L1
iR5570 / iR6570
When attaching the copy tray to the machine, be sure to attach the delivery roll to the center of the delivery roller.
When attaching the shift tray or the finisher to the machine, however, do not perform the following steps.
1) Open the front cover, and draw out the fixing feeder unit. Remove the 2 screws [1], and detach the delivery roller
guide [2].
[1]
O N
F
O F
[2] [3]
F-1-70
[4]
Chapter 1
0009-2248
31