Checking The Connection To The Network; 1Overview; 2Ping Operating Procedure; 3Checking With Remote Host Address - Canon iR6570 Series Installation Procedure

1.3 Checking the Connection to the Network

1.3.1 Overview
iR5570 / iR6570
Perform this procedure only when connecting the machine to networks.
If user's network environment is TCP/IP, make sure using Ping that the network settings are properly made.
If user's network environment is IPX/SPX or Apple Talk, you don't need to perform this procedure.
1.3.2 Ping Operating Procedure
iR5570 / iR6570
1) Select the following service mode COPIER>TEST>NETWORK>PING, and select PING.
2) Enter the IP address using the numeric keys on the control panel, and press OK.
3) Press the start key.
- OK is displayed if Ping succeeds, but NG is displayed if it ends in failure.
<NETWORK> < 1/1 >
PING 0. 0. 0. 0
[1]
+/-
F-1-68
[1] Result (OK/NG)
[2] IP address entry
1.3.3 Checking with Remote Host Address
iR5570 / iR6570
You can check whether a network connection is available by executing Ping using the remote host address.
Remote host address: IP address of PC connecting to/operating under TCP/IP network environment to which the
machine is connected.
1) Tell a system administrator that you will check a network connection using Ping.
2) Ask the system administrator about the remote host address.
3) Enter the remote host address in PING.
<READY >
[2]
OK
Chapter 1
0008-8560
0008-8561
0008-8562
27