9Setting Up The Toner Bottle; 10Connecting The Reader Communication Cable - Canon iR6570 Series Installation Procedure

Hide thumbs Also See for iR6570 Series:
Table of Contents

Advertisement

1.2.9 Setting Up the Toner
Bottle
iR5570 / iR6570
1) Take out the toner bottle from the packing box.
2) Open the toner supply cover [1], and push down on
the lock lever [2].
F-1-36
3) Holding the toner bottle [1] as shown in below, turn
the cap [2] to the direction of the arrow, and remove
the cap from the toner bottle.
[2]
F-1-37
4) Hold the toner bottle with its mouth [1] to right,
keeping in a horizontal position, set it to the supply
case [2] in the machine.
0008-8101
[2]
[1]
[1]
F-1-38
5) Pull up the lock lever [1] upward and fix the toner
bottle [2].
[2]
F-1-39
6) Close the toner supply cover.
When the main power turns on in the state that the
toner bottle has not been set in the machine, the toner
remaining meter will be displayed as 'less than 25%'
on the control panel. Thereby, make sure that the
toner bottle is set in the machine before turning on the
switch of the main power.
1.2.10
Connecting
Reader Communication
Cable
iR5570 / iR6570
Chapter 1
[2]
[1]
[1]
the
0009-4282
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir5570 series

Table of Contents