Canon iR6570 Series Installation Procedure page 33

F-1-61
2) Attach the right rear bottom cover with the 2
screws.
<Attaching the grip cover>
1) Attach the grip cover (small) [1] to the latch
blanking cover [2].
[2]
F-1-62
2) Attach the 3 grip covers (large) [1] and the cover [2]
assembled in step 1) to the machine.
<Attaching the service book holder>
1) Remove the double-faced tape at the back of the
Points to Note
When attaching the service book holder to the
machine, 6mm or more space must be ensured
between the front of the bottom sheet metal [2] and the
[1]
front of the service book holder. If the paper deck is
attached afterward without the space, the paper deck
rail hits the service book holder.
When attaching the paper deck at the same time, be
sure to attach the paper deck before the service book
holder.
[1]
F-1-63
service book holder [1], and attach the holder to the
bottom of the machine.
Chapter 1
[1]
[2]
25