Bioness NESS L300 Plus System User Manual page 13

NESS L300 Plus
•
Skin problems where the FS Cuffs are worn may be aggravated by the
NESS L300 Plus.
•
Turn off the NESS L300 Plus before removing or replacing the electrodes.
•
Keep the NESS L300 Plus out of the reach of children.
•
The NESS L300 Plus Control Unit is splash proof. However, protect
all electronic components from contact with water, such as from sinks,
bathtubs, shower stalls, rain, snow, etc.
•
Do not leave the NESS L300 Plus stored where temperatures may exceed
the acceptable environmental range: -20°C to +60°C (-4°F to +140°F).
Temperature extremes can damage the components.
•
Do not attempt to repair your NESS L300 Plus. Contact Bioness if you
experience a technical problem not covered in this guide.
•
The FS Cuffs are to be worn only on the leg of the patient for whom they
are fitted. They should not be worn by anyone else or on any other part
of the body.
•
Turn off the NESS L300 Plus before putting on the FS Cuffs. Do not turn
on the NESS L300 Plus until the FS Cuffs are fastened in place.
•
Shut off the NESS L300 Plus before driving, operating machinery, or
performing any activity in which involuntary muscle contractions could
injure you.
•
Protect the NESS L300 Plus electronic components from condensation.
When moving the components between hot and cold temperatures, place
them in an airtight plastic bag, and let them slowly (for at least two hours)
adjust to the temperature change before use.
•
Medical electrical equipment needs special precautions for electromagnetic
compatibility.
6 User's Guide