Jofemar Vision Snack Plus Technical Manual page 50

vision
Snack Plus/Easy Combo // Vending
increase the value of the digit chosen.
To change characters.
1 2 3+ 4- c-del
!
1 2 3+ 4- c-del
[42] PROGRAMMING THE PASSWORD (MDB)
This address appears in programs prepared for communication with a modem. When
you access this address the cursor will blink to show its position at each time.
0-9 C-DEL
The password can have a maximum of 4 characters.
The values you can program for each character are the numbers between 0 and 9 or
a blank space.
0-9 C-DEL
158
Deletes the characters from right to left one at a time.
0-9 C-DEL
15
[43] PROGRAMMING THE GSM PIN (MDB)
This address will only appear if a modem interface card has been detected connected to
the machine. When you access this address the cursor will blink to show its position at
each time.
0-9 C-DEL
The GSM PIN can have a maximum of 4 characters.
The values you can program for each character are the numbers between 0 and 9.
0-9 C-DEL
132
Deletes the characters from right to left one at a time.
0-9 C-DEL
13
[44] ALARM CONSULTATION (MDB)
This address will appear if the machine has been connected to a modem interface card.
The alarms programmed as active will be shown on the display, if they have
previously been sent via a modem.
MNP86V03GBV00
1 2 3+ 4- c-del
#
All the characters are stored as blank spaces.
PASSWORD
PROGRAMMING
GSM PIN
PROGRAMMING
CHECKING
ALARMS
Date: 2010/06/14 Rev. 0 PAGE 50 OF 62