Jofemar Vision Snack Plus Technical Manual page 35

vision
Snack Plus/Easy Combo // Vending
● Move the channel motors: when you choose this option, you access the motor
voltage selection menu for the motors you are going to move.
MOVE MOTORS
OF CHANNELS
To increase or to reduce the voltage by 0.5 Vdc.
Voltage:
5.0 VDC
Validate the voltage chosen and access the channel number selection menu.
*- #- A-CHOOSE
XXX
You can choose the channel by entering the 3 digits using the keys
moving from one channel to the next using key
to move backward.
1-MOVE
CHANNEL XXX
Press key and that channel's motor will move, supplied by the chosen voltage.
*- #- A-CHOOSE
113
● Checking the product detection system: if there is a communication error with the
product detection system, it will be shown on the display and you will not be able to
access this option. Otherwise, when you access this option, you enter a menu where
there are several options from which you can choose
TEST OF
PRO.DET. SYSTEM
Available options:
TEST OF
BRANCHS OFF
TEST OF
BRANCH 1
After selecting the desired option:
You access another menu where you can select the phototransistor whose voltage value
you wish to consult.
P.D.S. PHOT. 01
964
The display shows on the top line the phototransistor chosen and on the bottom line the
value of the voltage.
..............................................................................
P.D.S. PHOT. 02
961
TEST OF
BRANCHS OFF
MNP86V03GBV00
Voltage:
5.5 VDC
to move forward or using key
Validates the selection.
To return to the previous menu.
All branches of IR emitters turned off.
TEST OF
BRANCH 2
P.D.S. PHOT. 03
945
TEST OF
PRO.DET. SYSTEM
Date: 2010/06/14 Rev. 0
Voltage:
5.0 VDC
to or by
TEST OF
BRANCH 3
Returns to the previous
menu.
PAGE 35 OF 62