Jofemar Vision Snack Plus Technical Manual page 29

vision
Snack Plus/Easy Combo // Vending
REFUND
OPTION
TEMPERATURE EXPIRATION
OPTIONS
BILL READER
OPTIONS
SELLING HOURS
LOCK OUT
BEEP PHONE TIMES
PROGRAMMING PROGRAMMING
GSM PIN
PROGRAMMING
NOTE: To modify the content of programming addresses, use the machine selection
pushbuttons. These should be used in the order and in the way indicated below for
each address.
Press...
You can choose whether you wish the programming address shown as descriptive text
PRICES
( PROGRAMMING ) or whether you wish the display to show the address number
aDDRESS 00
*- #- A-ENTER
( ). To do this, press key
operation. The descriptive one is used by default.
Press key to automatically exit programming mode. A small check of machine
mechanisms will be performed and the machine will return to vending mode.
The machine can also exit programming mode automatically and return to standby
without credit mode if the door is closed and 40 seconds elapse without any key being
pressed or without any coin being inserted (in the case of tube reloading).
NOTE: The addresses marked with the text
versions for the J-2000 MDB coin changer. The other addresses are common to all
MNP86V03GBV00
SALE MAXIMUM
OPTIONS REFUND
CODES
OPTIONS PROGRAMMING
TOKENS VOLTAGE FOR
OPTIONS CHANNELS MOTORS
PROGRAM MONETARY UNIT
VERSION PROGRAMMING
PHONE NUMBER
PROGRAMMING
CHECKING PROGRAMMING
ALARMS MESSAGE
Access to programming
to access the menu
A
B to exit programming mode
C to cancel the option
D to view the option on the display
*
to go to the next function
#
to go to the previous function
to toggle between the two modes of
(MDB) are only available for program
Date: 2010/06/14 Rev. 0
LIGHTS
PROGRAMMING
RS232
communication
PRICES FOR
CARD SALES
LANGUAGE
PROGRAMMING
PASSWORD
PROGRAMMING
PAGE 29 OF 62