Jofemar Vision Snack Plus Technical Manual page 36

vision
Snack Plus/Easy Combo // Vending
[09] CHANNEL CONFIGURATION
At this address you can program, consult and erase channel configurations.
Access the configuration programming option.
1-PROG. 2-CHECK
CONFIG. C-DEL
First enter the selection number. You can program the following numbers: 11-19, 21-
29, 31-39, 41-49, 51-59, 61-69 and 71-79. Then enter the channel numbers to be
associated to the selection number chosen (110-116, 120-126, 130-139, 140-149, 150-
159, 160-169, 170-179 and 180-189). You can only enter the numbers of the channels
that the machine has detected as connected.
SELECTION NUMBER
_
*- #- A-CHOOSE
SAVED
SELECTION NUMBER
_
You can choose the channel by entering the 3 digits using the keys
moving from one channel to the next using key
to move backward.
Access programmed data consultation.
Enter the selection number you wish to consult. The display will show the numbers of
the channels associated to this selection number.
SELECTION NUMBER
_
PASSWORD:
---
If you enter the key "
left without an association to any selection number (i.e., they will all be associated to
selection number 0) and the display will blink.
If you enter the key "
allows you use the keypad to enter detected and connected channels which you do not
wish to be associated to any selection number.
Finally, if you enter the key "
you need to reconfigure them.
[10] COIN INHIBITION (MDB)
When you access this address it shows the value of the coin and its status (inhibited or
enabled).
MNP86V03GBV00
MACHINE
COMPOSITION
*- #- A-CHOOSE
XXX
Validates the selection.
Returns to the previous menu.
to move forward or using key
ASSOCIATED CHANNEL NUMBER:
CHANNELS:
Access the menu to enter the key.
",all detected and not connected channels will be
"you will access a channel selection menu that
"all channel configurations are erased and
COIN
INHIBITION
Date: 2010/06/14 Rev. 0
to or by
XXX
PAGE 36 OF 62