Technical Information
PVG 32 Proportional Valve Group
Technical characteristics
PVP pressure relief valve characteristics
©
Danfoss | November 2017
The measured characteristics in this catalog are typical measured values.
During measuring a mineral based hydraulic fluid with a viscosity of 21 mm
of 50 °C [122 °F] was used.
The pressure relief valve is set at an fluid flow of 15 l/min [4 US gal/min]. Pressure setting range for PVP
with PVSI end plate is 30 to 350 bar [435 to 5075 psi] and for PVP with PVS end plate is 30 to 300 bar [435
to 4351 psi].
Pressure relief valve characteristic
2
/s [102 SUS] at a temperature
Neutral by-pass pressure drop (open center)
BC00000038en-US0803 | 29