Technical Information
PVG 32 Proportional Valve Group
Technical characteristics
32 |
©
Danfoss | November 2017
PVB without pressure compensation, open center PVP
The spool flow Q
is dependent on the supplied pump fluid flow, Q
A/B
The characteristics apply to supply oil flow of 130 l/min [34.3 US gal/min] with the actuation of one basic
module and the supply flow level. If several basic modules are activated at the same time, the
characteristic depends on the load pressure of the actuated basic modules. The pressure drop of any oil
flowing back to tank (Q
- Q
P
A/B
Fluid flow as a function of spool travel
) is read on the curve for neutral flow pressure in PVP.
.
P
BC00000038en-US0803