Technical Characteristics; General; Pvp, Pump Side Module - Danfoss PVG 120 Technical Information

Technical Information
PVG 120 Proportional Valve Group

Technical Characteristics

General

PVP, pump side module

© Danfoss | March 2017
All characteristics and values in the technical information are typical measured results. For the hydraulic
system a mineral based hydraulic oil with a viscosity of 21mm
[122°F] was used.
PVP, pressure relief valve characteristic
The pressure relief valve is adjustable within the 50-400 bar [725-6225 psi] range by means of a screw.
PVP, neutral flow pressure in PVP, open center
U = PVP for PVB oil flow > 180 l/min [47.6 US gal/min]
S = PVP, standard
2
/s [102 SUS] and a temperature of 50°C
520L0356 | BC00000040en_US1002 | 23