Overview of Equipment and Functional Description
4
Overview of Equipment and Functional Description
1
2
3
Fig. 1: Overview of equipment
1.
Counter-magnet
2.
Reed switch
The Metering Monitor "Flow Control" essentially consists of a tube with a float (3) and a bypass with
an adjustable cross-section. The "Flow Control" can be adjusted to the stroke volume of the
metering pump using the adjustable control valve (rotary dial), thereby adjusting its response sensi‐
tivity.
There is always a flow with this design of metering monitor, as the float only narrows the bypass,
rather than the hole.
12
4
3.
Float
4.
Control valve (rotary dial)
1
2
3
4
A2236