Connecting Emulation Pod - Fujitsu MB2140 Series Hardware Manual

This chapter describes connecting the main unit when it is not switched on. For the names of the components,
see 2.2.
Cautions:
Turn off the power when connecting/disconnecting cables; otherwise,
the main unit will be damaged.
When disconnecting a cable, hold its case or connector; otherwise,
the cable may break.

3.1 CONNECTING EMULATION POD

Connect pod interface cables to the main unit and emulation pod as shown in Figure 3.1.
The connector covers of the pod interface cables A, B and C are riveted at different locations to prevent a
connection error. Also, a guide is installed in the connectors of the main unit. Match the alphabetic marks of
the pod interface cables with those of the main unit and pod.
CONNECTIONS
3-3