Appearance And Names Of Components; Fig. 2.2 Appearance Of Main Unit (Front View) - Fujitsu MB2140 Series Hardware Manual

2.2 APPEARANCE AND NAMES OF COMPONENTS

This section describes the names of components. For more information on connections, read Chapter 3.
Figures 2.2 and 2.3 show the appearance of the main unit and the names of components, respectively.
READY LED
D
C
Pod interface cable D connector
Pod interface cable C connector
READY LED . . . . . . . . . . . . . . . . . . . . . . . . . .
POWER LED . . . . . . . . . . . . . . . . . . . . . . . . .
HARD ERROR LED . . . . . . . . . . . . . . . . . . .
Pod interface cable A to D connectors
PRODUCT DESCRIPTION
POWER LED
READY POWER ERROR

Fig. 2.2 Appearance of Main Unit (Front View)

Lit when both main unit and host computer ready for communica-
tion
Lit when power on
Lit when hardware error occurred
. . . Connectors for connecting pod (The D connector is an extension
connector used to connect a pod with a D connector).
2-4
HARD ERROR LED
Pod interface cable B connector
Pod interface cable A connector
B
A