Related Manuals for Fujitsu MB89P935
Summary of Contents for Fujitsu MB89P935
- Page 1 MB89P935 OTP BOARD Documentation Fujitsu Microelectronics America Inc San Jose CA Revision: V1.0 Date: 01/18/01...
-
Page 2: Warranty And Disclaimer
San Jose ´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics America Inc San Jose in original packing and without further defects resulting from the customer’s use or the transport. - Page 3 Contents 1. Introduction 2. Hardware Documentation Board Features Hardware Requirement Jumper Setting Hardware Set-up 3 Software Documentation 3.1 Software Requirement 3.2 Software installation 3.3 Running the Sample Programs Appendix Schematic and drawings...
- Page 4 1. Introduction The MB89P935A OTP Board is a low cost target board for the Fujitsu MB89930A series. It can be used as a low cost target system for software development. The board supports on-board serial programming of OTPROM via Yokogawa programmer or via the RS232 interface.
-
Page 5: Hardware Setup
PC with Windows3.1x or higher. Sample application programs for MB89930A series. OTP programming utility Software Installation Insert the Fujitsu CD-ROM into the CD-ROM drive and install the Softune Workbench for 8-bit Microcontroller. Install the OTP programming utility. iii) Install the sample program for MB89930A series. - Page 6 Cross References: MB89930A Series Datasheet MB89930A Series Hardware Manual...
- Page 7 Appendix Schematic: MB89P935 OTP Board...