Shuttle FX43G User Manual page 70

RTC Alarm Resume
When this item is enabled, your can set the date and time at which the
RTC (real-time clock) alarm awakens the system from suspend mode.
Ø The choice: Disabled or Enabled.
Data (of Month)
This item selects the alarm date.
Ø Key in a DEC number: Min=0, Max=31.
Resume Time (hh:mm:ss)
This item selects the alarm Time.
[hh] Ø Key in a DEC number: Min=0, Max=23.
[mm] Ø Key in a DEC number: Min=0, Max=59.
[ss] Ø Key in a DEC number: Min=0, Max=59.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu of detailed options.
Primary INTR
Select ON/OFF to enable/disable a specified IRQ.
Ø The choice: OFF or ON.
In the following is a list of IRQs (Interrupt Requests), which can be
exempted much as the COM ports and LPT ports above can. When
an I/O device wants to gain the attention of the operating system, it
signals this by causing an IRQ to occur. When the operating system
is ready to respond to the request, it interrupts itself and performs the
service. When on mode exists, activity will neither prevent the sys-
tem from going into a power management mode nor awaken it.
IRQ3 (COM 2)
IRQ5 (LPT 2)
IRQ7 (LPT 1)
IRQ9 (IRQ2 Redir)
IRQ11 (Reserved)
IRQ13 (Coprocessor)
IRQ15 (Reserved)
Ø The choice: Disabled or Enabled.
IRQ4 (COM 1)
IRQ6 (Floppy Disk)
IRQ8 (RTC Alarm)
IRQ10 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ14 (Hard Disk)
- 65 -