Shuttle FX43G User Manual page 62

AGP Mode
This item allows you to select the AGP Mode.
Ø The Choice: 1X, 2X, or 4X.
AGP Driving Control
This item enables the system to automatically select its output buffer
drive strength or make it manually selectable by an end user.
Ø The Choice: Auto or Manual.
AGP Driving Value
This item enables an end user to manually select the AGP output buffer
drive strength.
Ø Key in a HEX number: Min=0000, Max=00FF.
AGP Fast Write
This item enables or disables AGP card fast written function.
Ø The Choice: Enabled or Disabled.
AGP Master 1 WS Write
Enable this item to write to the AGP with one wait executed state.
Ø The Choice: Enabled or Disabled.
AGP Master 1 WS Read
Enable this item to read from the AGP with one wait executed state.
Ø The Choice: Enabled or Disabled.
AGP 3.0 Calibration cycle
This item enables or disables AGP 3.0 card calibration cycle.
Ø The Choice: Enabled or Disabled.
VGA Share Memory Size
This item defines the onboard VGA shared memory size.
Ø The Choice: Disabled, 16M, 32M, or 64M.
CPU Direct Access FB
This item enables or disables CPU direct access frequency bus.
Ø The Choice: Enabled or Disabled.
Select Display Device
This item specifies a mode for the display device.
Ø The Choice: CRT, TV, or CRT+TV.
TV_type
This item specifies a type for the TV.
Ø The Choice: NTSC, PAL, PALM, PALN, or PALNc.
- 57 -