Wireless Bridge
In the Wireless — Wireless Bridge screen, you can select the mode for the router, either access
point or wireless bridge. If you enable the bridge restrict option, then proceed to enter the MAC
addresses of the remote bridges.
To restrict a wireless bridge:
1.
In the Wireless — Wireless Bridge screen select the access point mode from the AP Mode
dropdown.
AP Mode options are
•
•
2.
From the Bridge Restrict dropdown select to Enable, Disable or Refresh (Enabled Scan).
If you have chosen to enable access point, in the Remote Bridges MAC Address text
box(es) MAC address(es) for the bridge(s).
3.
If you have chosen access point Enabled (Scan), select the MAC addresses to restrict and
clock Apply / Save.
Access Point
Wireless Bridge
65xx-A1 Family Router Users Guide
114