Security; Wps Setup (5618/6519 Only) - Zhone 6519-X1 User Manual

Security

The Wireless – Security screen allows you to select the network authentication method and to
enable or disable WPS (WiFi Protected Setup).
Note that depending on whether WPS is enabled and the network authentication method that is
selected, the screen will change accordingly so additional fields can be configured for the specific
authentication method.

WPS setup (5618/6519 only)

•
Enable WPS — WPS securely allows client access to the router. When you enable WPS,
clients must start the access process within two minutes. The router supports the PIN WPS
method only.
•
Add Client — For WPA-PSK, WPA2 PSK or OPEN modes, enter a PIN, then click Add
Enrollee. The client must enter this PIN within two minutes to start the WPS procedure.
•
Set WPS AP Mode—If your provider is using an external registrar for security, select
Configured. The PIN for AP mode is specified by the registrar. Provide this PIN to the client.
Click Config AP to begin the registration process with the client.
65xx-A1 Family Router Users Guide
102