To remove the Static IP address, click the check box next to the MAC address and click Remove
Entries.
You may be able to assign a second IP address for the router. To do that, click the check box
Configure the second IP Address and enter the IP address and subnet mask.
Click the Apply/Save button to save the LAN configuration data.
NAT
You can configure Virtual Servers, Port Triggering, and DMZ Host when NAT (Network Address
Translation) is enabled.
Virtual Servers
A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on
the LAN side. The following figure shows the screen that allows you to configure your virtual
server(s).
To direct incoming traffic from a service (or other server):
1.
Click Add to configure a virtual server.
65xx-A1 Family Router Users Guide
51