1.
Click Add.
2.
In the Add IP Addresses screen, assign the IP address of the management station that is
permitted to access the local management services, in the IP Address text box.
3.
Enter the Subnet Mask.
4.
Click Save / Apply.
5.
In the Access Control -- IP Address screen, select the IP address then select Enabled to
enable Access Control Mode.
Update Software
Note: Do not perform this operation unless you are instructed to by your ISP technician.
If your ISP releases new software for your router, follow these steps to perform an upgrade:
1.
Obtain an updated software image file from your ISP.
2.
Enter the path to the image file location or click on the Browse button to locate the image
file.
3.
Click Update Software once (and only once) to upload the new image file.
65xx-A1 Family Router Users Guide
132