Signaling Group; Trunk Group - Avaya S8300 Installing And Configuring

add signaling-group 20
Group Number: 20
Trunk Group for Channel Selection: 20
Supplementary Service Protocol: a
Near-end Node Name: procr
Near-end Listen Port: 1719
LRQ Required? y
RRQ Required? n
Media Encryption? n
DTMF over IP: out-of-band
Use the command add trunk–group <group number> to add an IP trunk group. The following
screen shows the configuration of the IP trunk group 20. As a standard IP trunk configuration,
Group Type is configured to isdn, Carrier Medium to H.323 and Service Type to tie.
add trunk-group 20
Group Number: 20
Group Name: TO Ciso-GK
Direction: two-way
Dial Access? n
Queue Length: 0
Service Type: tie
SZ; Reviewed:
SPOC 8/10/2007

SIGNALING GROUP

Group Type: h.323
Remote Office? n
SBS? n
IP Video? n
T303 Timer(sec): 10
Far-end Network Region: 2

TRUNK GROUP

Group Type: isdn
Outgoing Display? n
Busy Threshold: 255
Auth Code? n
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
Max number of NCA TSC: 20
Max number of CA TSC: 0
Trunk Group for NCA TSC:
Far-end Node Name: Cisco-GK
Far-end Listen Port: 1719
Calls Share IP Signaling Connection? n
H245 Control Addr On FACility? n
Bypass If IP Threshold Exceeded? n
H.235 Annex H Required? n
Direct IP-IP Audio Connections? n
IP Audio Hairpinning? n
Interworking Message: PROGress
DCP/Analog Bearer Capability: 3.1kHz
COR: 1 TN: 1
Carrier Medium: H.323
Night Service:
Member Assignment Method: manual
Page 1 of 5
Page 1 of 21
CDR Reports: y
TAC: 120
ACM-Cisco-CM-GK.doc
8 of 30