Optional Features; Dial Plan Analysis Table - Avaya S8300 Installing And Configuring

3.4. Configuring Dial Plan and Caller ID on Avaya Communication
Manager
Uniform Dialing Plan (UDP) and Automated Alternate Routing (AAR) are used for the call
routing. The configurations in this section are for demonstration only.
Use the command display system-parameters customer-options to verify that Uniform Dialing
Plan is set to y.
display system-parameters customer-options
Port Network Support? y
Processor and System MSP? n
Private Networking? y
...
Use the command change dialplan analysis to configure the dial plan. The dialed digits 61xxx
("x" is any digit) is configured as ext. Note the digits 61xxx match the extensions created on the
Cisco CallManager.
change dialplan analysis
Dialed Total
String Length Type
1 3
2 4
61 5
SZ; Reviewed:
SPOC 8/10/2007

OPTIONAL FEATURES

Posted Messages? n
PNC Duplication? n

DIAL PLAN ANALYSIS TABLE

Percent Full: 1
Call Dialed
String
dac
ext
ext
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
Tenant Partitioning? n
Terminal Trans. Init. (TTI)? n
Time of Day Routing? n
Uniform Dialing Plan? y
Usage Allocation Enhancements? y
TN2501 VAL Maximum Capacity?
Total Call Dialed
Length Type String
Page 5 of 10
Page 1 of 12
Total Call
Length Type
13 of 30
ACM-Cisco-CM-GK.doc