Avaya S8300 Installing And Configuring page 6

Use the command change ip-network-region 2 to specify the IP codec set to be used for
network region 2 and the IP codec set used between network region 1 and region 2. Page 1 of 19
shows that codec set 2 is used for network region 2.
change ip-network-region 2
Region: 2
Location:
Name:
AUDIO PARAMETERS
Codec Set: 2
UDP Port Min: 16384
UDP Port Max: 32767
DIFFSERV/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 3
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5
Page 3 of 19 shows that calls between network region 2 and 1 are allowed, up to the 256:Kbps.
Calls above the specified limit will not be permitted, and may be re-routed to a different path.
The bandwidth usage is based on the packet size and codec selection. Avaya supports IP Call
Admission Control via Bandwidth Limits (CAC-BL). Codec set 2 is used for calls between
regions 2 and 1.
change ip-network-region 2
src dst codec direct
rgn rgn set WAN
2 1 2 y
2 2 2
SZ; Reviewed:
SPOC 8/10/2007
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Inter Network Region Connection Management
Total
WAN-BW-limits
256:Kbits
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
IP Audio Hairpinning? n
RTCP Reporting Enabled? y
AUDIO RESOURCE RESERVATION PARAMETERS
Video
WAN-BW-limits Intervening-regions
0:Kbits
Page 1 of 19
RSVP Enabled? n
Page 3 of
Dyn
CAC IGAR
6 of 30
ACM-Cisco-CM-GK.doc
19
n