Installing A Driver For Windows Nt 3.51 - 3Com TokenLink Velocity XL 3C359B User Manual

64 C
HAPTER
To define a locally administered network address, see
"Defining the LAA Address for Windows NT" on page 76
for more details.
To select applications for high-priority network access, see
"Configuring Class of Service" on page 78 for more details.

Installing a Driver for Windows NT 3.51

Follow these steps to install the NDIS 3 driver for
Windows NT 3.51.
1 If you are using the 3.5-inch diskettes, insert
TokenDisk diskette 2 in the drive. If you are using the
TokenLink Velocity XL CD, insert it in the CD-ROM
drive.
2 In the Main group, double-click the Control Panel
icon.
3 In the Control Panel group, double-click the
Network icon.
4 In the Network Settings dialog box, click
Add Adapter.
5 In the Add Network Adapter dialog box, scroll to the
bottom of the Network Adapter Card selection list.
Select <Other> Requires disk from manufacturer.
6 Click Continue.
7 Accept the displayed default path by clicking OK to
select the NIC.
For example, if you are using the 3.5-inch diskettes, the
following path is displayed:
a:\
This path identifies the location of the NDIS 3 driver files for
Windows NT 3.51.
The driver files are copied to the C drive. A prompt
appears, asking if you want to restart your computer.
8 Remove the TokenDisk diskette or TokenLink
Velocity XL CD and click Restart now.
This concludes the procedure for installing the NDIS 3
driver for Windows NT 3.51. To confirm successful
4: M W
ICROSOFT INDOWS
E
NVIRONMENT