Checking The Remote Wake-Up Function - 3Com TokenLink Velocity XL 3C359B User Manual

102 C
HAPTER

Checking the Remote Wake-Up Function

If the PC does not boot up when a Magic Packet wake-up
packet is sent, perform these general troubleshooting steps:
1 Verify that the Pattern and Wake on Magic Packet
settings are enabled.
a Click the Network Neighborhood icon.
b Click Properties.
c Double-click the 3Com NIC icon and click the
2 If the driver version is current, the keywords are
enabled, and the PC still does not wake up, check the
BIOS.
a Boot the PC and enter the BIOS.
b Locate the Wake-Up on PME signal or Wake-Up on LAN
c Verify that the setting is enabled.
3 Remove the PC cover and check the Remote Wake-Up
connection.
Verify that the Remote Wake-Up cable is plugged in to the
NIC as well as to the motherboard. Unplug and reinsert the
cable if necessary.
6: T
ROUBLESHOOTING
Advanced tab.
Make sure that Pattern and Wake on Magic Packet are
enabled. If these settings do not exist, either the NIC is
not a Remote Wake-Up NIC or the driver installation file
is outdated. For the latest 3C359B NIC drivers and
installation files, download the TokenDisk diskettes for
the 3C359B NIC from the 3Com Web site:
http://www.3com.com/
event setting.
If you experience difficulties locating these settings,
consult the reference guide for your PC, or contact you
PC vendor.