Displaying The Universal Address; Configuration And Diagnostic Program Window - 3Com TokenLink Velocity XL 3C359B User Manual

Displaying the Universal Address

The Configuration and Diagnostic Program displays the
3C359B NIC's universal address. Follow these steps to
display the universal address:
1 Boot from a DOS diskette to run the diagnostic
program. Display the DOS prompt.
2 If you are using the 3.5-inch TokenDisk diskettes,
insert TokenDisk diskette 1 in the drive and make
that drive the active drive. For example, enter:
a:
If you are using the TokenLink Velocity XL CD (in Drive
D for example), enter the following path:
d:\disk_1
3 Enter the following command:
3pcid
The Configuration and Diagnostic Program window
is displayed as shown in Figure 4.
Figure 4 Configuration and Diagnostic Program Window
4 Record for future reference the 12-digit universal
token ring address displayed on the Diagnostic
and Configuration Program window (Figure 4).
For example:
Network Addr = 00600891CCA8
Installing an OS/2 Client Driver for NetWare 39