Configuring The Novell Os/2 Requester; Installing A Netware Server Driver - 3Com TokenLink Velocity XL 3C359B User Manual

42 C
HAPTER
A message is displayed, stating that the installation process
is complete. Follow the instructions, and continue with
configuration steps in the following section.
Configuring the Novell OS/2 Requester
When you have followed the displayed instructions at
the end of the Novell OS/2 Requester installation process,
a message appears concerning certain configuration
requirements.
After reading the message regarding configuration
requirements, follow these steps:
1 Click the Configuration menu bar item and select
"This Workstation..." to check the NET.CFG file for
the proper NIC configuration.
2 Verify the link driver header, node address, and
frame type.
Your NET.CFG file should look similar to the following:
LINK DRIVER TLNKPODI
The node address should be set to the UAA or the LAA.
Modify and save the NET.CFG file if the node address and
frame type are not correct.
3 Remove the OS/2 Requester diskette and restart
the PC.
This completes the procedure for installing the OS/2 client
driver for NetWare.

Installing a NetWare Server Driver

This section contains information about installing the
TLNKPODI.LAN NetWare server driver for the 3C359B NIC
in the following environments:
3: N N W
OVELL ET ARE
Readme
Help
Node Address 00608C112233
Frame Token-Ring MSB
Frame Token-Ring_SNAP MSB
NetWare 3.12
NetWare 4.1x
NetWare 5.0
E
NVIRONMENTS