Typical Operating Procedure; Measurement Example - HBM PMX Quick Start Manual

PMX
5.2

Typical operating procedure

5.2.1

Measurement example

The easiest way to configure the PMX measuring ampli­
fier and its measurement channels is via the PMX web
browser. The sensors, Ethernet cable and voltage supply
must be properly connected.
Connect the PMX to a PC (HOST) to see the device
overview.
The entire device, with all measurement cards and sig­
nals, as well as all device information, is displayed here.
► Switch to the ADMINISTRATOR level (may be
password-protected), then via the menu button to
Settings/ Amplifier.
A3259-4.0 HBM: public
Quick start
19