Table of Contents
Advertisement
AT8901
1.1.4
Optional Accessories
1.1.4.1
AMC
Two standard full height single width AMC bays for standard or custom AMCs are implement-
ed.
AMC slots can be equipped with a
• Processor-AMC, e.g. acting as the system controller (saving one ATCA slot)
• HDD-AMC as mass storage device for the Processor-AMC
• SETS-AMC providing network synchronisation for telecom applications
1.1.4.2
RTM
RTM is optional. For further information on RTM, please refer to Chapter 3, section 3.6. and
visit our web site at www.kontron.com.
1.1.5
Hot Swap Capability
The board supports Full Hot Swap capability as required by PICMG 3.0 R1.0. It can be re-
moved from or installed in the system while it is on (without powering-down the system). Please
refer to the PICMG 3.0 R1.0 specification for additional details.
1.1.6
Board Options
The Kontron ATCA Hub family is available with different Fabric Mezzanine options:
Table 1-1:
Fabric Interface Options
Product
AT8901
AT8902
AT8903
The Base Interface switch can be one of the following:
Table 1-2:
Base Interface Options
Base Switch
BCM56500
BCM56300
Fabric Interface
none
Gigabit Ethernet
Advanced Switching
AT8901 Flavour
Full featured (enhanced QoS)
Lite featured
Page 1 - 6
Introduction
AT8901 User Guide
Advertisement
Table of Contents
