Wenger Music Desk Assembly Instructions

For the wenger percussion cabinet

Table of Contents

Download this manual

ONTENTS

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Note: Please read and understand these instructions before assembling the parts.

Note: Remove all items from the shipping cartons and arrange them in a convenient location.

Refer to the illustrations on the following pages.

If you need additional information, contact Wenger Corporation using the information below.

©Wenger Corporation 2012

Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: 1-800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

for the Wenger Percussion Cabinet

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Fastener Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Replacement Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Music Desk Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Printed in USA 08/12

Assembly Instructions

Music Desk

Part #147H156-02

Table of Contents

Need help?

Do you have a question about the Music Desk and is the answer not in the manual?

Page 1 Warranty ........2 Music Desk Assembly ......3 Note: Please read and understand these instructions before assembling the parts.
Page 2 Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may appear in this manual. In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of this manual.
Page 3 Remove all items from the hardware bag and determine where all of the fasteners will be used. EQUIRED OOLS The following tools must be available to assemble the Music Desk: • Rubber Mallet • Variable Speed Drill (to drive hex socket screws) •...
Page 4 Percussion Cabinet. Back of Cabinet Detail E 9. Attach the Desk Pivot Bracket to the Music Desk with the remaining two Machine Screws (3) and two hex socket cap nuts (6). (Detail F)