Installation Check-Up - Faema Teorema Manual

Installation Module C)
WATER CONNECTIONS
• No leaks from the connections or tubes
FUNCTIONING
• Boiler and operating pressures are normal.
• The pressure gauge is working properly.
• The self-leveling device is working properly.
• The expansion valves are working properly
: ONCE THE MACHINE HAS BEEN INSTALLED AND IS READY FOR USE, BEFORE ALLOWING THE
INSTRUCTIONS BELOW:
•
• Let each group dispense water for about a minute.
• Continuously dispense hot water (pressing the appropriate button) until at least 6 liters of water have been used for a
machine with 2 groups and 9 liters for a machine with 3 groups (see the "Cleaning and Maintenance" Chapter in the User's
Manual).
(also with Autosteam)
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
5 EN