Chaning The Water In The Boiler; Cup-Warmer - Faema Teorema Manual

Ensure that the indication on the display corresponds to the
working pressure value.
approximately 5 seconds.
The following message will be displayed: "WATER CHANGE".
The water from the boiler will drain from the hot water nozzle
(10) (60 - 70% ca. of the total capacity).
The boiler resistance and all dispensing keys will be disabled.
Dispensing will stop automatically (Note. The delivery can
be interrupted in whichever moment by means of the push
button STOP ).
After the procedure, the machine will return to its normal
(where contemplated)
The machines have a cup warmer tray (
pre-heating the cups.
Only place cups and glasses used with the coffee machine on
) pressed down for
6
1 2
) for stocking and
1
the cup tray.
Thoroughly drain the cups before placing them on the tray.
To activate the resistance of the cup warmer tray (
button (6
key a number of times.
- = maximum power symbol
- = medium power symbol
- = minimum power symbol
- no symbol = OFF
Therefore, to disable tray heating (
times until no symbol is visible on the display.
N.B. The heating of the cup warmer tray (
during the automatic switch off phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine auto-
matically switches on.
8 EN
English
2
1 2
10
), press the key (6) several
) is deactivated
English
.
) press
6)