Steam And Hot Water Dispensing Pipes; Grill And Drip Basin; Discharge Basin; Bodywork - Faema Teorema Manual

Using a clean sponge, wash with hot water removing any organic
residue present. Rinse carefully.
To clean the inside of the steam nozzles, follow these steps:
Turn the nozzle towards the cup tray and carefully activate steam
dispensing at least once.
1. Remove the grille from the basin.
2. Extract the basin.
3. Rinse the grid and tray under running water.
insert your hands beneath the
front panel.
This operation must be made at the end of each working day
1. After removing the tray, remove
the lid to the draining tray.
2. Remove any residues with a
sponge and rinse well with cold
water.
3. Pour about a liter of hot water into
the discharge basin to remove any
discharge residues.
This operation must be made at the end of each working day
Use a soft cloth and cleaning products WITHOUT ammonia or
abrasives, removing any organic residue present in the work area.
NOTE. Do not spray liquids into the panel slots.
This operation must be made at the end of each working day
This operation must be made at the end of each working day
1
1
16 EN
English
English