Cleaning And Maintenance - Faema Teorema Manual

Procedure to effect at the end of the work day on all groups
or when signaled by the machine.
grease and scaling deposited when the coffee is dispensed.
solidify. This will impair the qualitative performance of the
coffee circuit.
COFFEE WASHING" will appear on the display.
This message will continue to appear until the wash cycle is
performed.
The coffee circuit can be washed in different ways:
• simultaneous
• sequential: each group is washed separately and in
sequence. It is therefore possible to continue using the
groups not involved in the washing process.
A third type of washing cycle can also be effected:
• single
group without having to wash the remaining ones. Groups
not involved in the washing cycle can still be used during
that time.
Note: The single washing cycle cannot be carried out if the
machine launches a warning message.
EXECUTE WASHING
The simultaneous washing mode lasts 7 minutes. The single
washing mode lasts 7 minutes for each dispensing group.
Programmed wash cycles that are not effected will be memo-
rized by the machine.
To perform the washing cycles, follow the steps on the next
pages.
EXECUTE
11 EN