Installation Check-Up - Faema Jubile E61 Use And Installation

These chapters in the manual are to be used by qualified, authorized technical staff.

6. Installation Check-up

WARNING:
AFTER INSTALLATION, CHECK TO SEE IF THE MACHINE IS WORKING PROPERLY (see the
Installation Module C)
WATER CONNECTIONS
• No leaks from the connections or tubes
FUNCTIONING
• Boiler and operating pressures are normal.
• The pressure gauge is working properly.
• The self-leveling device is working properly.
• The expansion valves are working properly
WARNING: ONCE THE MACHINE HAS BEEN INSTALLED AND IS READY FOR USE, BEFORE ALLOWING THE
WORKER TO START USING THE MACHINE, WASH THE INTERNAL COMPONENTS ACCORDING TO THE
INSTRUCTIONS BELOW:
GROUPS
• Hook up the filter holders to the groups (without coffee).
• Let each group dispense water for about a minute.
HOT WATER
• Continuously dispense hot water (pressing the appropriate button) until at least 4 liters of water have been used for a machine
with 1 group and 6 liters of water have been used for a machine with 2 groups (see the "Cleaning and Maintenance" Chapter
in the User's Manual).
STEAM
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
6