Steam Dispensing - Faema Teorema Manual

Use the appropriate insulating
devices ( ) to move the water and steam wands.
Machines equipped with the AUTOSTEAM (STOP STEAM)
dispensing system have the "
set temperature is reached" function, and can rapidly heat
and froth milk.
1
Select the type of milk you prefer (heated or frothed)
by changing the position of the "steam selector lever" (11
depending on your selection, the following icons will appear
on the lower right hand corner of the display:
hot milk (lever position 1).
The relationship between the lever position (11) and the icon
on the display is illustrated here.
Insert the steam nozzle (9a) into a suitable container,
making sure the bulb is completely immersed in the milk.
Press the "AUTOSTEAM automatic steam key" (
the display.
4
When the set temperature is reached, steam dispensing
can be stopped:
- manually, pressing again the "AUTOSTEAM automatic
steam key" ( ) .
NOTE: During the programming phase, the positions of the
lever (11) (
according to the different needs.
Completely immerse the left (
container with the liquid to be heated and push the steam
control lever (17) upwards.
Wait until the liquid has reached the desired temperature, then
lower the steam command lever to stop the issue of steam.
(Turbosteam)
)
) steam nozzle into the
10 EN
English
1 2
17
English
11
9a