3Com CoreBuilder 2500 Software Installation And Release Notes page 12

12 C B 2500 I
ORE UILDER
Table 2 Physical Configuration Limitations
System Configuration
2 old 10BASE-FL
modules (3C201400)
1 FDDI (MMF or SMF)
module
1 ATM module
2 old 10BASE-FL
modules (3C201400)
1 100BASE-FX module
1 ATM module
2 old 10BASE-FL
modules (3C201400)
1 100BASE-TX module
1 ATM module
2 old 10BASE-FL
modules (3C201400)
1 TP-DDI module
1 ATM module
* This system configuration would be supported if you replace both of the older 10BASE-FL modules (3C201400) with the newer
10BASE-FL modules (3C201400A).
S S
NTELLIGENT WITCHING OFTWARE
Table 2 outlines the configuration restrictions.
Chassis with Revision 8.x
Motherboard
Configuration is not
supported*
Draws 15 amps
Configuration is not
supported*
Draws 14.4 amps
Configuration is not
supported*
Draws 14.6 amps
Configuration is not
supported*
Draws 15.2 amps
V 8.1.2
ERSION
Chassis with Revision 7.x
Motherboard
Configuration is not
supported*
Draws 14.3 amps
Supported configuration
Supported configuration
Configuration is not
supported*
Draws 14.5 amps
Chassis with Revision 6.x
Motherboard
Configuration is not
supported*
Draws 14.45 amps
Supported configuration
Configuration is not
supported*
Draws 14.05 amps
Configuration is not
supported*
Draws 14.65 amps