Preinstallation Tasks - 3Com CoreBuilder 2500 Software Installation And Release Notes

Preinstallation Tasks

2 Because you need it later in the procedure, write down the exact
pathname, using exact letter case, for the location of each software file
on the host device.
If you copy files from one host device to another host device using the file
transfer protocol (FTP), be aware that the case of the letters in the
software filenames may change during the transfer.
3 Proceed to "Preinstallation Tasks" next.
To ensure that the system and the host device are ready to continue with
the procedure, follow these steps:
1 Using the ip ping command, verify that the CoreBuilder 2500 system
can reach the host computer to which you copied the updated software.
See the CoreBuilder 2500 Administration Console User Guide for more
information about the ip ping command.
2 Verify that the host device has FTP server software running on it.
3 Using the system nvData save command, save your system's
NVRAM configuration data.
See the CoreBuilder 2500 Administration Console User Guide for more
information about the system nvData save command.
4 Proceed to "Installing the Diagnostic Software" next.
Software Installation Procedure 17