Elation RAYZOR 360Z User Manual page 22

WHITE BALANCE SETTING
This feature provides the ability to individually adjust the maximum dimmer intensity for
each LED color (Red, Green, Blue, White, Amber, Cyan, U.V.) and store these values as a
White Balance preset. This can be a useful tool when the output intensity of a group of
same model fixtures with varying usage times, needs to be calibrated to match as much as
possible. Once a new White Balance preset is saved to the fixture, the maximum dimmer
intensity values cannot be changed until the White Balance preset is updated, erased or
restored to the factory default setting.
1. Set ALL DMX channels to zero (0) then set the SPECIAL FUNCTIONS channel (CH20 in
Basic Mode, CH26 in Stand Mode, CH32 in Extend Mode) to DMX value of (91-93) EDIT
and SAVE WHITE BALANCE ENABLED.
2. Set the COLOR MODE - WHITE BALANCE channel (CH18 in Basic Mode, CH24 in
Stand Mode, CH30 in Extend Mode) to DMX value of (190-254) EDIT and SAVE WHITE
BALANCE Setting.
3. Adjust each LED color channel to the desired intensity level (0-255).
4. Set the COLOR MODE - WHITE BALANCE channel (CH18 in Basic Mode, CH24 in
Stand Mode, CH30 in Extend Mode) to DMX value of (255) SAVE New WHITE
BALANCE Setting to Fixture(s).
5. To save a new White Balance preset, repeat steps 1-4 above.
22