Table of Contents
Advertisement
I N S T A L L A T I O N G U I D E L I N E S
CLAMP INSTALLATION
When mounting fixture to truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Bracket using an M10 screw fitted through the
center hole of the Omega Bracket. The fixture provides a built-in rigging point for a
SAFETY CABLE. Be sure to only use the designated rigging point for the safety cable and
never secure a safety cable to a carrying handle.
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE (NOT
INCLUDED) THAT MEETS ALL LOCAL, NATIONAL, AND COUNTRY CODES
AND REGULATIONS WHENEVER INSTALLING FIXTURE IN A SUSPENDED
ENVIRONMENT!
POWER LINKING
USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE
POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX
POWER OUTPUT ON THIS FIXTURE. CHECK SILK SCREEN FOR MAX AMPS.
KLING-NET / ART-NET CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit
Ethernet Switch that supports IGMP (Internet Group Management Protocol) is required.
Using a Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior
of all connected devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
12
Advertisement
Table of Contents
