Elation RAYZOR 360Z User Manual page 19

EFFECT ADJUST – Calibration
ONLY QUALIFIED TECHNICIANS SHO ULD PERFORM THI S FUNCTION.
This function allows small adjustments to be made to the Pan, Tilt, and Zoom movements
to compensate for ware or in the event a sensor has been knocked slightly out of place.
Because improper use of this function can result in undesired operation this function has
been password protected. The password is 050 and must be entered each time the
calibration menu function is entered. Because calibration is an extremely delicate
procedure, instructions on performing this action are left out of this manual. For a first time
calibrator, please contact our customer support team for step-by-step instructions.
USER MODE SET – Edit User Mode
Create user defined channel orders allowing the fixture to match the channel order of other
fixtures on the market for easier operation. A total of three user modes may be configured:
User Mode A, User Mode B, and User Mode C.
EDIT PROGRAM – Rec. Controller
The fixture features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the desired
scene numbers via the encoder (from – to). When you call up the scenes at your controller,
they will automatically be transmitted to the moving head.
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit
can start 3 different Slave units, which run 3 different programs. The Master unit sends the
3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave
unit was assigned to. If e.g. a Slave unit is set to "Slave 1" in the menu "Set to Slave", the
Master unit sends "Auto Program Part 1" to the Slave unit.
If set to "Slave 2", the Slave unit receives "Auto Program Part 2".
19